Width is the first factor that you require to keep in mind when you are building stairs in Sydney for your home. For this, you need to have a clear idea of how you are going to use them in the first place. A lot in this case also depends on the kind of house that you live in. Experts of the industry suggest that they be around 0.75 metres at the very least. If you live in a two-story house your stairs should be at least a meter wide. In the case of non-residential establishments such as commercial buildings, shopping complexes, and hospitals the stairs should be at least 2 meters wide.
Width is the first factor that you require to keep in mind when you are building stairs in Sydney for your home. For this, you need to have a clear idea of how you are going to use them in the first place. A lot in this case also depends on the kind of house that you live in. Experts of the industry suggest that they be around 0.75 metres at the very least. If you live in a two-story house your stairs should be at least a meter wide. In the case of non-residential establishments such as commercial buildings, shopping complexes, and hospitals the stairs should be at least 2 meters wide.
The slope of the stairs
This is an important factor to keep in mind when you are making floating stairs in Sydney. Always make sure that the slope is not a steep one. The best figure, in this case, is that of 30 degrees. That way, you would not experience any issues while using them. However, you can take it up to 45 degrees if you do not have enough space. Make sure that it does not get steeper than that.
Width of the tread
If you are building stairs for a residential property the tread should be at least 250 mm wide and remember that this does not include the nosing.
In case you are making outdoor stairs in Sydney for non-residential property, this particular width should be at least 300 mm. When you add nosing to the stairs they become wider. However, please take care and make sure that the tread should be equally wide throughout. This would make sure that there is no accident over here. For ones who do not know what the word tread means in this case, it is the horizontal surface you are stepping on when you are climbing the stairs up and down.
Height of risers
If you wish to use the stairs in Sydney comfortably you should not make the risers taller than 190 mm in case of a residential building. In case it is a non-residential building this figure should be within 150 and 160 mm. If you do not have enough space you can restrict it to 200 mm. However, in that case, you must also remember that this would be difficult to climb for the children and kids. If you wish to avoid any accident make sure that the height of the riser is the same throughout the staircase.
In the context of stairs in Sydney, the term riser means the vertical distance between two stairs. So, it is basically the height that you have to cover when you are going down or up from one stair to the next.
Size of the steps
As we have said already, ensure that all risers are of the same height throughout a staircase. If you fail to do so there is a good chance that there could be an accident. If the risers are of various heights it would disrupt the cadence of your feet and thus you may fall down the stairs.
Stair slippage
If you want to make sure that the stairs in Sydney of your home are accessible and safe you would have to focus on the floors as well. You should always use non-slippery material to make the floors of the stairs in your home. If the stairs are slippery the chances of an accident are always high – at times they could prove to be fatal as well. Marble floors are the best options for homes. However, make sure that you do not polish the floors often enough.
Handrails at the right height
Once again, this is essential so that you experience no discomfort while using the stairs in Sydney in your home. Ensure that they can be seen clearly at night as well. If you have open stairs you should have handrails at each end as well. In fact, if you have walls on one side you can install brass handrails over there as well. The handrails should be between 800 and 900 mm in terms of height. The space within the supports of these handrails should not be more than 250 mm in the case of homes.
Proper lighting arrangements
Always ensure that you have the right kind of lighting arrangements for the stairs in Sydney in your home. Otherwise, there could be an accident as well. It is always better to use 2-way electric switches for stairs so that people have access at both ends of the stairs. It is always better to make arrangements for proper ventilation and availability of natural light on the stairs as that would help you keep your electric bills in check. This way, you would also be able to use the stairs in case the electricity is not working.
Having gates when necessary
It is very important to have gates on the stairs in Sydney in your home in certain situations. Quite often we see kids and babies climb stairs and being unable to climb down. This leads them to panic and they start crying so that they can get help. In certain cases where the kid is brave enough to come down on their own, there could be an accident as well. This is where you need the lock-and-key arrangement that we are talking about over here. Also, this needs to be done at both ends of the staircase.
Enough headroom
The height above the stairs in Sydney is known as the headroom. The headroom should be more than 170 cm. Otherwise, there could be an accident. In these cases, the people coming down the stairs are in greater danger than people who are climbing the same. If the person is tall enough they may strike their heads in the beam of the landing and fall down the stairs. In cases, you cannot spare any more headroom. Kindly leave a sticker that asks people to proceed with caution when they are coming down the stairs.
