What are Surgical Saws?
Surgical saws are utilized to cut or remove bones during surgical operation, reconstruction, and other procedures. These surgical instruments are used for forensics, interrogation, and many surgeries. These saws have a very sharp metal cut into strong bones easily and efficiently. There are many different types of surgical saws available, as well as bone cutters like snips and shears. Orthopedic saws are sold by manufacturers of surgical and autopsy equipment for use in health services.
When it comes to saws used for surgery, there are several surgical procedures to choose from, depending on the type of procedure performed. Stryker saw, for example, is an attractive saw that will cut easily with bone, but will not damage the skin. Gigli’s body consists of wire strips used to cut the bone, while the back saw looks like a jigsaw, and is used to cut open the sternum to gain access to the chest.
Small hand saws are available to cut the bones. In all cases, a bone marrow transplant is designed to prevent sterilization during use. These saws are very hard, with a sharp blade that holds their sharpness, as surgeons want to work with sharp instruments to ensure suction, and cuts that will reduce injury to the patient. Whether a bone marrow transplant is used for amputation or craniotomy, it is important to avoid damage to the saw and to select a saw that will be suitable for the operation.
Methode of using
When using an orthopedic saw for surgery or autopsy, full face protection should be worn. Facial protection includes a mask over the mask and nose as well as eye protection. This prevents people from inhaling dust from the bone or damage to the eyes due to the flight of bones. Masks are usually worn in these ways to avoid contamination, but eye protection is not always common and it is important to ensure that safety is provided.
Types of Surgical Saws
Bergmann Plaster Saw
The Bergmann Plaster Saw Bone Saw is designed to reduce bone tissue. Bergmann Plaster Saw is made of rectangular knife this is certainly fitted with a curved round handle to be used to cut through the installation of concrete.
Engel Plaster Saw
The structure of EngelPlaster Saw is manufactured with a rectangle serrated blade with a curved loop handle to use to cut through plaster casts. . Engel Plaster Saw is designed in a semi-circular, sharp blade with a molded handle for cutting the plaster casts. The sharp blade is high-quality steel and the handle is chrome-plated with a length of 15 CM.
Engel Plaster Saw is undoubtedly suitable for use in cutting plaster casts. This can be very helpful in cutting through projects set in orthopedic repair. Multidisciplinary muscle surgery requires a slurry of proper positioning of the bones as the repair cycle takes place. The saw is made of stainless steel and is intended to effectively cut the object without reducing the sharpness of the saw.
Surgical Oscillating Saws
Surgical oscillating saws are used for joint surgery and are separated from the knee joints and hip joints during joint surgery. In joint surgery, the proportion of knee joints is very large.
For orthopedic surgery
When performing orthopedic surgery and treatment, it is necessary to cut the bones of the damaged parts to clean the ends of the bones. In actual use, it has been found that traditional and orthopedic bone saws have lower efficiency, and greater work capacity, and can no longer meet the requirements for efficient use. However, the currently operated electric saws can successfully overcome traditional machines that do not work in terms of efficiency and intensity.
However, when used, it does not have the necessary rest on the posterior surface of the bone, leading to a low level of part of the bone, which cannot meet the need for subsequent direct surgery; on the other hand, it does not adapt to the conditions under which it is used, and it can be done simultaneously. Incision cutting operation significantly affected surgical operation efficiency. At the same time, they cannot meet the specific requirements for special cuts and other surgical procedures that require multiple incisions at the same time.
Satterlee Bone Saw
Satterlee Bone Saw is a bone used for cutting specially designed for bone cutting. This saw features a handle attached to a large metal case that provides strength and durability. The sheer design makes it ideal for cutting bones with a wide range of sizes and shapes.
Charriere Bone Saw
Charriere Bone Saw is well suited for use in orthopedic surgery. It is designed specifically for cutting with a wide diameter bone. This saw includes a loop handle attached to a U-shaped body across the other that extends the blade from 12.0 mm or 14.0 mm. In addition, this tool is available with two blades and a complete or single set with two blade widths.
what is Bone Hook
Bone Hook is a versatile tool that is well-used in processes that require bone adjustment and holding. The sharp bone hook allows it to grasp the bones and move them to the desired location. In addition, the structure is used in restoring bones and other hard tissues to make it easy. This hook is available with or a stainless steel t-handle that makes it satisfying and selective for the surgeon. This tool can be utilized for giving access to deep bones or muscles
Types of Bone Hook
Volkman Bone Hook
it is a versatile tool and can be you for different bones. . It is well suited for use ranging from fracture reduction to straight bone. This particular bone hook incorporates a unique handle design that incorporates a circular grip and a tear-coated grip. It allows it to be handled in many different ways. In addition, unobtrusive style and a variety of lengths make it perfectly suited to any patient’s need or surgical condition.
Dingman Zygoma Hook
The Dingman Zygoma Hook is a useful tool for zygomatic arch reduction procedures. The wide width of the hook allows for seating for a variety of arch. The large handle gives the surgeon sufficient measure to restore the arch to its proper position
Bonus
For skin treatment visit here