Step By Step Dryer Vent Cleaning Pittsburgh

Do you know dirty vents can become fire hazards for the home? Are you having trouble with clogged ducts that can cause damage to your home? Contact green air duct services today to get your apertures deep Dryer Vent Cleaning Pittsburgh.

If you are concerned with time and clothes, clearing your ducts isn’t important just for that. If they are left dirty for months and years, the dirt accumulation in lint blend with hot air and cause a fire. According to a report, duct fires damage $40 million with severe injuries and death every year.

In this article, we’ll talk about when you should check on your HVAC system and guide you to clear them.

Signs you need dryer vent cleaning Pittsburgh

• The room is warmer than normal

If you feel the heat every time you enter your laundry room, it can be due to an overheated dryer. When the air’s passage has been blocked, try to dust off the internal system. If it’s still hot, then there might be lint in pipes.

• Clothes taking longer to dry

Are your clothes taking hours and hours to get dry but still are damp? If yes, then seek the help of a professional about this concern. This is one of the early signs of a defective HVAC system.

• Burning smell

If your laundry room smells like dirty clothes or musty socks, that’s normal. But if a dense burned smell hits your nostrils then that is an alarming sign of an overheated appliance that is going to burst in few minutes. At such times, turn off the power supply rapidly and call the service.

• Warning indications

So many appliances have advance features in them these days. These features include safety too. They show the warning through a blinking red light. Others show in an alarming sound and error code. Don’t ignore such indications.

How to clean your vent (easy steps)   

1. Find your duct

Before you jump right in with water and brush, search the main part. The hot air passes through these pipes and escapes from channels to the outside.

Take a look inside when you find it. See if it’s clean. If you find dust and dead bugs inside, clear them out.

2. Disconnect power

After identifying and getting enough knowledge about the functioning of it, next switch off it. Don’t be tough on it. Gently pull off the pipes from the wall and be careful not to break them.

3. Vacuum the lint

Moving to the next step, as now you can see through the interior more significantly, you’ll need a vacuum. And pull out all the lint residing inside the holes.

4. Brush & power drill

Now for the deep cleaning part, take the dryer brush and your channel cleaning kit and inject the end of the brush into the rod of a power drill. Tighten to prevent any accident. Now power it on and dust off all parts especially the inaccessible part.

If the length isn’t accessible to the parts you want, contact experts to get it done.

5. Clear up and reconnect

At this point, sweep off the lint and dust out of your house. Switch on the appliance and check its performance now. You can replace the soft foil channels for better efficiency.